Your Driving Rig

Discussion in 'Driver's Lounge' started by THE_KART96, Sep 29, 2010.

  1. MiamiPhill

    MiamiPhill TPRA Staff

    Wait, what do you mean, where did you put the new fan if not in the same place.?:sCo_chinscratch:
     
  2. Jimmy1971

    Jimmy1971 Administrator Staff Member

    It was originally on the top cover of the wheel, on top of the heat sink, which is positioned on the side of the motor. Thrustmaster moved it to beside the heat sink in later versions of the wheel. That is were I installed the new fan.
     
  3. SSRacing69

    SSRacing69 Administrator

    Oh sweet, that's a nice rig!
     
  4. PuckHead77

    PuckHead77 Licensed Racer

    Awesome set up Jimmy !!! Fanatec make some great gear!!!
     
  5. Jimmy1971

    Jimmy1971 Administrator Staff Member

    When I purchased my Fanatec ClubSport pedals I also purchased the Brake Performance Kit. Yesterday I finally decided to give them a try. I didn't want the brake to be to stiff, so I installed the 2 softest elastomers.

    So what started as a good feeling brake is now a perfect feeling brake. Before doing the change I had the preload at 3.5, travel was still good but the compression didn't feel right. Now I have the preload at 1 and the amount of travel and the compression feel great. The Damper is set at the same spot as before at 4.

    So, for you guys with V3 pedals, I highly recommend the Performance Kit.
     
    SSRacing69 likes this.
  6. MiamiPhill

    MiamiPhill TPRA Staff

    Cool setup there Jimmy!!
     

Share This Page